RDS 5.0

Radio Data System encoder

MPX input port

RDS output (only internal RDS)

Sync 19 KHz input

Two Composite MPX outputs

Bypass IN/OUT with faulty power supply

GPIO port

Web server - Ethernet control

SNMP protocol

Ethernet port RJ45

Serial ports USB

Two RS 232 serial port

ADVANCED TECHNOLOGY FOR EXCELLENT RESULTS

The principal features of this encoder are as follows:

PI, PS, AF, TP, TA, PTY, M/S, DI / PTY, EON, RT, RT+, CT, ODA, TMC, TDC, IH

RDS standard IEC 62196: 1999 standard and UECP-SPB490 (final version 6.02 or later) of the EBU

Encoder RDS 5.0

Technical details

RDS signal: Standard specification EBU Doc. Tech. 3244-E and Cenelec PrEn 50067

Coding: Differential and Biphase

Modulation DSB-suppressed carrier

Frequency 57 KHz

Bandwidth ± 2.4 KHz

RDS injection into MPX - infinite ÷ - 16 dB

RDS output level 0 dBu

Output Impedance 100 ohm (max load 5 Kohm)

Connector BNC grounded to chassis

Data Syncrhonization

Terminal Interface: Ethernet RJ45/USB/RS232 at rear

Data Input Full duplex

Format Selectable

Transmission Speed 2400 ÷ 19600 baud

Connector RS232 9 contact cannon female

RDS Data management Microprocessor controlled 128 Kbyte

Non volatile memory RAM data retention 10 years.

Remote I / O

Type Cmos level

Connector 25 pin cannon female

General Data

Power requirement 87 ÷ 265 VAC 50 ÷ 60 Hz

Consumption 8 VA

Dimension (WxHxD) 48.3 x 24 x 4.4 cm 1 rack unit

Weight 2,8 Kg. (6.1 Lbs)

Operating Temp. 0 ÷ 50° C

Operating Humidity.

Max 95% non condensing