HyperDeck Studio HD Mini

The flagship design of the HyperDeck Studio line packs all the features of professional decks into the space of a single rack unit. 

The most compact of the HyperDecks follows the dimensions of the Teranex Mini drives. The modular design allows 3 HyperDeck Studio HD Minis, or a combination of decks and switchers, converters or streaming processors, to be placed side by side in a single rack unit. Although small, it offers advanced features such as 3G-SDI input and output, HDMI output, two SD card slots, built-in sync and timecode generators, front control panel, and AC and DC power. You can also connect HyperDeck Studio HD Mini to your computer via USB, which detects it as a webcam, and use any video software.

HyperDeck Studio HD Mini

Broadcast Deck

For recording and playback of H.264, ProRes or DNxHD files in SD/HD formats up to 1080p/60 on SD/UHS-II cards or external USB drives

3G-SDI inputs and outputs

HDMI output

Dual SD card slots allow card swapping while recording is in progress

Integrated clock and time code generators

Front panel controls

Acts like a webcam when connected to a computer via the USB port

Can be used with any video software

Connections:

1 SDI video input

1 SDI video output

SDI rates: 270 Mbit, 1.5 G, 3 G

1 HDMI video output

Time code connections: 1 BNC input, 1 BNC output

Reference connections: 1 BNC input, 1 BNC output

Tri-sync or black burst

SDI audio inputs and outputs: 16 embedded audio channels

HDMI audio outputs: 8 embedded audio channels

Remote control: 1 RS-422 input

Computer interface: 1 USB-C-3.0 (up to 5 Gb/s) for recording to external drives, webcam output, software configuration and updates

Video sampling frequency: 4:2:2 YUV

Colour accuracy: 10 bit

Colour spaces: Rec. 601, Rec. 709, Rec. 2020

HDR support: Hybrid Log-Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084

Multirate support: automatic detection of SD and HD

2 SD card slots

1 USB-C 3.0 expansion port for external recording in SD, HD and 2K DCI

Media type: UHS-I and UHS-II SD cards

Storage media format: formats media in ExFAT (Windows/Mac) or HFS+ (Mac) file systems

Supported codecs: ProRes HQ QuickTime, ProRes 422 QuickTime, ProRes LT QuickTime, ProRes Proxy QuickTime for all formats up to 1080p/60.

DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF for 720p and 1080p HD formats up to 60 fps

H.264 SDI 4:2:2 10 bit, H.264 High 4:2:0 8 bit, H.264 Medium 4:2:0 8 bit and H.264 Low 4:2:0 8 bit for all progressive scan formats up to 1080p/60

Built-in control panel: 8 buttons for transport and unit control with seek controller and 2.2" colour display

External control: RS-422 deck control, SDI start/stop, timecode run

Blackmagic HyperDeck Ethernet Protocol included Supports remote file uploads via FTP

Software included: Blackmagic OS, Blackmagic HyperDeck Setup

Product software upgrades loaded at start-up or via Blackmagic

HyperDeck Setup via USB port

Compatible operating systems: Mac Catalina 10.15, Mac Big Sur 11.1 or higher, Windows 10, 64 bit

1 integrated AC power supply for 100-240 V, 50/60 Hz

1x 12V DC power supply unit with 5.5mm barrel connector for external power supply or battery operation ( power cable not included)

Dimensions: 140 x 177 x 44.2 mm (1 height unit, one third rack width)

Weight: 820 g